HomeThe ProblemROICase StudiesAboutResourcesPricingContact Start Hiring →
Freight playbook

Truck Dispatcher Check Calls and Track-and-Trace: The Remote Playbook

Brokers stop giving loads to carriers who go quiet. Here is how a remote dispatcher or track-and-trace rep runs check calls on every load: the schedule, scripts for late loads and detention, exceptions and the numbers to watch.

  • Check-call schedule
  • Late-load scripts
  • Detention timestamps
Hire a track-and-trace rep →Jump to the scripts

Track-and-trace in one box

  • 6 touchpoints per load, from dispatch to POD
  • ELD first, phone second
  • Bad news early, with a new ETA
  • Timestamps for every detention minute
  • POD to billing the same hour

How does a remote dispatcher run check calls?

They follow a fixed schedule for every load: confirm the load sheet with the driver at dispatch, check ETA and hours 2 hours before pickup, log arrival, loaded time, seal and BOL at pickup, update location from the ELD every 4 hours or each morning, confirm ETA before delivery, and collect the POD at delivery. Each touchpoint updates the TMS and the broker or shipper. Late loads are reported early with a new ETA; detention is claimed with timestamps under the rate con terms.

6touchpoints per load, dispatch to delivery
ELD firstphone second
Every 4 hin-transit updates
Same hourPOD to billing

The check-call schedule for every load

  1. 1
    DispatchLoad assigned

    Send the driver the load sheet: PU and DEL addresses, appointment times, PO and reference numbers, commodity, weight, special instructions. Driver confirms.

  2. 2
    2 hours before PUPre-pickup check

    Driver ETA to the shipper, hours of service left, trailer type and condition. Late? Tell the broker now, not at the appointment.

  3. 3
    At pickupArrived and loaded

    Arrival time, loaded time, seal number, piece count, BOL photo. Start the detention clock if free time runs out.

  4. 4
    Every 4 hours or each morningIn-transit check

    Location from the ELD (Motive, Samsara), next stop, ETA, any issue. Update the TMS and the broker or shipper portal.

  5. 5
    Before deliveryPre-delivery check

    Confirm ETA against the delivery appointment. Request a reschedule early if needed.

  6. 6
    At deliveryDelivered and POD

    Arrival, empty time, POD photo with signature and any OS&D notes, lumper receipt. Send to billing the same hour.

Brokers updated before they ask. Track-and-trace reps tested on check-call roleplays.Hire a track-and-trace rep →

When a load goes off plan

The first action matters most: tell the broker before they ask.
See this as a table
ExceptionFirst action
Running lateNew ETA to broker; ask to move the appointment
BreakdownLocation, road service, recovery plan within 30 minutes
At the dockDetention timestamps in writing
Freight problemPhotos and notes on the POD before signing

Scripts for check calls and updates

Driver check call

Dispatcher: "Morning, Luis. Load 4471 to Dallas: I show you near Texarkana on the ELD. Still good for the 2pm appointment? Any issues with the truck or your hours?"

Use the ELD location first; the call confirms ETA, hours and problems.

Late load, broker update

Dispatcher: "Hi Karen, update on your load 88213. Driver hit a closure on I-40, new ETA 4:30 instead of 2:00. Can you ask the receiver for a later appointment? I'll update you at 1pm."

Bad news early, with a new ETA and the next update time.

Detention notice

Dispatcher: "Karen, our driver checked in at 7:58 for an 8:00 appointment and is still waiting at 10:15. Free time ends at 10:00, so detention starts now per the rate con. I'll send the in and out times when he's loaded."

Quote the rate con terms and the timestamps. Ask for approval in writing.

Shipper status email

Subject: Load 88213, PU Memphis → DEL Dallas: in transit, ETA 4:30pm CT
Body: "Picked up 6:42am, 18 pallets, seal 220145. Current location Texarkana. Delayed by a closure on I-40; receiver notified for a new appointment. Next update 1pm CT."

Load number, lane and ETA in the subject line.

Driver not answering

Dispatcher: "Luis, call dispatch when safe. Need ETA for load 4471." (text)
Then: check the ELD for movement; call again in 20 minutes; escalate to the fleet manager after 60.

Do not call a driver who is moving. Text, then wait for a safe stop.

Who decides what

Your remote dispatcher or repYou or your team
TaskOwner
Check calls, ETAs, TMS and portal updatesDispatcher or track-and-trace rep
Broker and shipper status updatesDispatcher or track-and-trace rep
Detention, layover and TONU requestsDispatcher, with timestamps
Rate changes and accessorial approvalOwner, fleet manager or broker rep
Breakdowns and road service spend over your limitFleet manager
OS&D claimsOwner or claims lead

Write your limits down: road-service spend, rate changes and who answers after hours.

Shifts: cover the freight clock

Swipe sideways to see the full day →

Track-and-trace coverage around the freight clockCoverage strip showing a Mexico City early shift, a Colombia later shift and a Manila night desk covering US freight hours and overnight.00:0003:0006:0009:0012:0015:0018:0021:00US Central freight dayMexico City dispatcherColombia dispatcherManila night deskShaded = 07:00–19:00 US Eastern (standard time). Bars = each shift in US Eastern time.
Two Latin America shifts cover the US freight day; a Philippine desk covers overnight check calls and early appointments. US standard time shown.
See this as a table
ShiftLocal hoursUS Eastern hours
Mexico City06:00–14:0007:00–15:00
Colombia10:00–18:0010:00–18:00
Manila07:00–15:0018:00–02:00

Recruiting: Mexico and Colombia for the US day and Spanish-speaking drivers; the Philippines for nights and weekends.

Cover the freight clock, nights included. Shortlist in 5–8 days.Hire a track-and-trace rep →

What to measure

01On-time updatesCheck calls sent on schedule, divided by check calls due
02Broker asksTimes a broker or shipper asked for status first (aim for zero)
03ETA accuracyDeliveries within 30 minutes of the last ETA sent
04Detention capturedDetention events billed, divided by detention events that happened
05POD to billingHours from delivery to POD in billing
Hear finalists run a late-load call before you hire.Hire a track-and-trace rep →

Hire a remote track-and-trace rep

Candidates take recorded check-call, late-load and detention roleplays before you meet them. Shortlist in 5–8 days; 6-month replacement guarantee.

Book a free hiring call →

Questions about check calls and track-and-trace

What is a check call in trucking?

A scheduled status update on a load: at pickup, in transit and at delivery. The dispatcher confirms location (from the ELD), ETA, hours of service and any problem, then updates the TMS and the broker or shipper.

How often should a dispatcher do check calls?

At dispatch, about 2 hours before pickup, at pickup, every 4 hours or each morning in transit (or as the broker requires on the rate con), before delivery and at delivery with the POD.

What does a track-and-trace rep do?

They follow every load from pickup to delivery: check calls, ETA updates to brokers and shippers, portal updates, appointment changes, detention timestamps, and POD collection. They escalate breakdowns, rate changes and claims to the owner or fleet manager.

Can an offshore dispatcher do check calls for a US trucking company?

Yes. They work from your TMS and ELD (Motive, Samsara) with a phone line on your system. Latin America covers the US day; the Philippines covers overnight. Talentige tests check-call and late-load roleplays before you meet anyone.

How do you hire a track-and-trace rep?

Look for US freight phone experience and TMS updates, test them on a late-load call and a detention notice, and match the shift to your freight. Talentige shows a shortlist in 5–8 days, with a hire in 1–2 weeks and a 6-month replacement guarantee. Compare agencies in the best freight dispatcher staffing agencies.

Get a free shortlist for this role

Not ready to book a call? Tell us the role and we will send you pre-screened candidate profiles by email. You pay nothing until you hire.

  1. 1Tell us the role and your hours
  2. 2Get your shortlist in 5–8 days
  3. 3Interview and hire in 1–2 weeks
From $1,200/month ($6.90/hour)6-month replacement guarantee12,850+ hires since 2015

We reply by email. Prefer to talk? Book a free hiring call.